|
< Back to Handi-Cap Wrap Main Page
Specification Sheet
| Properties |
Units |
Value |
Test Method |
| 1. |
Density |
pcf |
1.7 |
Mil PPP-C-1752A |
| 2. |
Cell Size |
mm |
0.8 |
ASTM D3576-77 |
| 3. |
Flexibility: Room Temp.
-65º F |
Z |
Pass
Pass |
Mil PPP-C-1752A
Mil PPP-C-1752A |
| 4. |
Compression Set |
% |
8.1 |
Mil PPP-C-1752A |
| 5. |
Compression Strength
10 % deflection
25 % deflection
50 % deflection |
psi |
1.5
5.3
16.6 |
ASTM D-1621 |
| 6. |
Tensile Strength |
psi |
51 |
ASTM D-412 |
| 7. |
Tear Strength |
lb/in |
20 |
ASTM D-1564 |
| 8. |
Co - Efficient of Thermal |
btu/hr.FA 2/0 F.in |
0.28 - 0.32 |
Guarded Hot Plate |
| 9. |
Thermal Stability |
% change Avg. |
-4.3 |
Mil PPP-C-1752A |
| 10. |
Maximum Temp. Service |
ºF |
160º - 180º |
- |
| 11. |
Water Absorption |
Ib/ft 2 |
0.01 |
Mil PPP-C-1752A |
| 12. |
Water Vapor Transmission |
Z |
0.1 - 0.2 |
ASTM C-355 |
| 13. |
Contact Corrosively |
Z |
None |
Mil PPP-C-1752A |
| 14. |
Dusting |
Z |
0.003 |
Mil PPP-C-1752A |
| 15. |
Abrasiveness |
Z |
Pass |
Mil PPP-C-1752A |
| 16. |
Flammability |
AEB. in/ATB.sec |
3.0 / 55 |
ASTM D-16929 |
|
